ZYTC Alloy Delivers AMS 5397 IN100 Cast Bars to Taiwan — Certified, Traceable, On Time
ZYTC Alloy has successfully completed an export order of IN100 cast bars to Taiwan, produced to AMS 5397 specification. The shipment comprised bars measuring ø120 × 150 mm, fully tested and certified before delivery. Regardless of order quantity, ZYTC Alloy applies the same standardized, process-driven, and professional production and inspection workflow to every batch. This commitment ensures that each IN100 cast bar leaving our facility meets the exact requirements of the customer’s application.
What Is IN100?
IN100 (UNS N13100) is a nickel-based precipitation-hardening cast superalloy designed for service temperatures up to 950°C. It belongs to the top group of high-temperature nickel-base superalloys due to its exceptionally high volume fraction of the γ′ strengthening phase — typically 60–70%. The high aluminum and titanium content, combined with cobalt and molybdenum for solid solution strengthening and boron and zirconium for grain boundary stabilization, gives IN100 outstanding creep rupture strength and oxidation resistance in demanding environments.
IN100 is produced via vacuum melting and vacuum casting, yielding a low impurity content and consistent microstructure. Its low density relative to its strength makes it particularly attractive for rotating components where weight reduction is critical, such as turbine blades, guide vanes, and turbocharger rotor impellers in gas turbine engines.
IN100 Chemical Composition (AMS 5397 / wt%)
| Element | Range (wt%) | Element | Range (wt%) |
|---|---|---|---|
| Ni | Balance | Co | 14.0 – 16.0 |
| Cr | 8.5 – 9.5 | Mo | 2.5 – 3.5 |
| Al | 3.8 – 5.7 | Ti | 3.5 – 5.0 |
| V | 0.6 – 0.9 | C | 0.13 – 0.22 |
| B | 0.012 – 0.022 | Zr | 0.05 – 0.09 |
| Fe | ≤ 1.0 | Si / Mn | ≤ 0.50 |
| P | ≤ 0.015 | S | ≤ 0.015 |
Source: AMS 5397G specification and equivalent published data for IN100.
IN100 Mechanical Properties
| Property | Room Temperature | At 650°C | At 750°C |
|---|---|---|---|
| Ultimate Tensile Strength | 990 – 1050 MPa | ~1050 MPa | ~1096 MPa |
| 0.2% Yield Strength | 755 – 848 MPa | ~889 MPa | ~876 MPa |
| Elongation | 9 – 14% | ~6% | ~6.5% |
| Hardness | HRC 38 | — | — |
Physical Properties: Density 7.75 – 7.80 g/cm³ | Melting Range 1260 – 1350°C | Dynamic Elastic Modulus ~215 GPa (RT)
IN100 vs. 713C: Key Differences
Both IN100 and Inconel 713C are vacuum-cast nickel-base superalloys used in high-temperature turbine applications, but their chemistries and performance profiles differ significantly.
| Parameter | IN100 | 713C |
|---|---|---|
| Cr | 8.5 – 9.5% | ~12.5% |
| Co | 14.0 – 16.0% | — (not specified) |
| Ti | 3.5 – 5.0% | ~0.8% |
| Al | 3.8 – 5.7% | ~6.1% |
| C | 0.13 – 0.22% | ~0.12% |
| Mo | 2.5 – 3.5% | ~4.2% |
| Nb + Ta | — | ~2.0% |
| γ′ Volume Fraction | 60 – 70% | Lower (Al+Ti ratio differs) |
| Density | 7.75 – 7.80 g/cm³ | Higher (due to Nb+Ta) |
| Strength-to-Density | Superior | Moderate |
| Primary Application | Turbine blades >800°C, turbocharger wheels | General turbine components, lower-temperature sections |
The critical distinction lies in the Al + Ti content: IN100 contains substantially more titanium (3.5–5.0% vs. ~0.8% in 713C), which drives the formation of a much higher γ′ fraction. This gives IN100 superior high-temperature strength and creep resistance, but also makes it more sensitive to weld liquation cracking and strain age cracking than 713C.
Specifications & Standards
ZYTC Alloy produces IN100 cast bars in strict accordance with:
| Standard | Description |
|---|---|
| AMS 5397 | Nickel alloy Castings, Investment, Corrosion- and Heat-Resistant, IN100, Vacuum Melted, Vacuum Cast, As-Cast |
| UNS N13100 | Unified Numbering System designation |
| GB K417 | Chinese equivalent grade (K17 / M17) |
| ASTM / AISI / ISO / JIS | As applicable per customer drawing or requirement |
ZYTC Alloy Capabilities
ZYTC Alloy brings 20 years of export experience in nickel-based alloys, cobalt-based alloys, and titanium alloys. Our independent laboratory performs chemical composition analysis, mechanical property testing, impact energy testing, and high-temperature performance evaluation in-house. We are certified to ISO 9001 and AS9120.
-
Product forms: IN100 wire, bar, tube, forgings, and custom parts per drawing
-
Processing standards: ASTM, AISI, ISO, JIS, AMS
-
Delivery: Fast lead times, competitive pricing, consistent quality
-
Quality assurance: Every batch tested and certified before shipment
Whether the order is a single bar or a production run, ZYTC Alloy applies the same standardized, process-driven, and professional approach from melting through final inspection.
