N14080 (HyMu 80 / Permalloy) – Premium Soft Magnetic Alloy

ZYTC Alloy is pleased to announce the successful completion and shipment of a N14080 (also known as HyMu 80 and Permalloy 80) Seamless Tube order to India. The product, manufactured strictly in accordance with ASTM A735-21, measured 58.7 × 0.83 × 115 mm. At ZYTC Alloy, we adhere to rigorous standardized, process-driven, and specialized production and inspection procedures. Every product undergoes thorough quality checks and is delivered only after passing all qualification tests.

What is N14080?

N14080 (UNS N14080, HyMu 80, Permalloy 80, Alloy 79) is a soft magnetic, unoriented nickel‑iron‑molybdenum alloy known for its exceptionally high initial permeability and maximum permeability, combined with minimum hysteresis loss. This high‑Nickel alloy (approximately 80% nickel) offers outstanding magnetic performance in low‑ and medium‑magnetic field applications.

The N14080 alloy is widely specified in international standards including ASTM A753‑21 (Type 4), AMS, and EN specifications, as well as equivalent grades such as 1J79 (Chinese standard) and W.Nr. 1.3813. ZYTC Alloy strictly follows all these standards in our manufacturing processes.

Chemical Composition of N14080

The N14080 alloy’s superior magnetic properties are derived from its precisely controlled chemistry. The typical chemical composition of N14080 (HyMu 80 / Permalloy 80) is as follows:

The presence of molybdenum is critical, as it increases the electrical resistivity of the alloy and reduces eddy current losses when the material is used in magnetic cores. HyMu 80 achieves an electrical resistivity of approximately 0.55 ohm·mm²/m (349 ohm circ mil/ft).

Mechanical Properties of N14080

In its annealed condition (which is the typical state for optimal magnetic performance), N14080 exhibits the following mechanical properties:

While the mechanical strength of annealed N14080 is moderate, the alloy exhibits excellent plasticity and can be easily formed into complex shapes. For applications requiring higher mechanical strength, N14080 can be supplied in cold‑worked tempers, though magnetic performance may be reduced.

Magnetic Properties of HyMu 80

The true value of N14080 lies in its exceptional magnetic performance:

• Initial Permeability (μi): ≥ 25,000 – 50,000 (can exceed 80,000 after optimal hydrogen annealing)

• Maximum Permeability (μmax): Up to 200,000 or higher

• Coercive Field Strength (Hc): Very low (< 2.4 A/m)

• Saturation Induction (Bs): Approximately 0.75 – 0.80 T

When heat‑treated using the recommended hydrogen annealing procedure and tested in accordance with ASTM A596, HyMu 80 achieves a minimum DC permeability of 80,000 at a flux density of 40 gauss.

Applications of N14080 / HyMu 80 / Permalloy 80

Thanks to its outstanding magnetic properties, N14080 is widely used in a variety of precision electronic and electrical applications, including:

• Magnetic Shielding – protecting sensitive electronic components from stray magnetic fields, including MRI rooms, cathode ray tubes, and avionics equipment

• Transformer Cores – high‑performance cores for power and signal transformers where compactness and low weight are essential

• Tape Wound Toroids – toroidal cores for high‑frequency applications

• Laminations – stacked laminations for electric motors and generators operating in low magnetic fields

• Current Sensors & Magnetic Amplifiers – cores for current transformers and magnetic amplifiers requiring high sensitivity

• Choke Coils & Inductors – components for power supplies and filtering circuits

• Audio & Recording Heads – precision magnetic components for high‑fidelity audio equipment

• High‑Sensitivity Relays – relay cores and armatures for low‑power switching devices

• Telephony Equipment – magnetic components for telephone exchange and communication systems

ZYTC Alloy Product Range for N14080

ZYTC Alloy offers a complete range of N14080 product forms to meet diverse customer requirements:

• N14080 Plate & Sheet

• N14080 Strip & Foil

• N14080 Wire (round, flat, square)

• N14080 Rod & Bar (round, hexagonal, square)

• N14080 Seamless Tube & Pipe

• N14080 Forgings (rings, discs, blocks, custom shapes)

• Custom machined components per customer drawings

We also offer N14080 in special dimensions, tempers, and tolerances upon request. Whether you need a prototype quantity or full production volumes, ZYTC Alloy is your reliable partner for N14080 materials.

Manufacturing & Quality Assurance

At ZYTC Alloy, every batch of N14080 is manufactured under strict quality control protocols:

• Standard Compliance: ASTM A735‑21, ASTM A753‑21, AMS, EN, GB/T, and other international specifications

• Process Control: Standardized and documented manufacturing processes

• Inspection: Dimensional, visual, mechanical, and magnetic property testing as applicable

• Traceability: Full material traceability from raw material to finished product

• Certification: Mill Test Reports (MTR / EN 10204 3.1) provided with each shipment

For the recent Indian order of N14080 Seamless Tube measuring 58.7 × 0.83 × 115 mm to ASTM A735-21, the product passed all inspection requirements before release.

Why Choose ZYTC Alloy for N14080?

• Fast delivery – short lead times for both standard and custom N14080 products

• Competitive pricing – factory‑direct pricing with no unnecessary markups

• High quality – strict adherence to international standards and customer specifications

• Complete product range – plates, sheets, strips, wires, rods, bars, tubes, pipes, and forgings

• Custom fabrication – we can machine N14080 to your exact drawings

• Global shipping – experienced in exporting N14080 to customers worldwide

Contact Us

For inquiries regarding N14080 (HyMu 80, Permalloy 80, UNS N14080), please contact ZYTC Alloy. We welcome orders for all product forms – plates, strips, wires, bars, tubes, and forgings – manufactured to ASTM, EN, or AMS standards. Fast delivery, competitive pricing, and uncompromised quality are our commitments to every customer.