About Alloy
Aluminum 2014 is the most free machining of the common aluminum alloys with excellent mechanical properties. It is widely used for automatic screw machine products in parts requiring extensive machining. It may be machined at high speeds with relatively heavy feeds. Its corrosion resistance is good with excellent hardness and strength.
Product Form
AMS 4028 Sheet and Plate - Alloy 2014 T0
AMS 4029 Sheet and Plate - Alloy 2014 T651
AMS 4121 Bars, Rods, Wire (rolled or cold finished) - Alloy 2014 T6
AMS 4133 Forgings, Rolled Rings - Alloy 2014 T6
AMS 4134 Die Forgings - Alloy 2014 T4
AMS 4135 Superseded by 4133 Forgings, Rolled Rings - Alloy 2014 T6
AMS 4153 Extrusions - Alloy 2014 T6
BS 7L37 Rivet Stock
BS 3L63 Tube
BS 2L77 Forging Stock T6 Temper
BS 2L87 Bars and Sections T6 Temper
BS 2L93 Plate Alloy 2014A
BS L102 Bars and Sections T4 Temper
BS L103 Forging Stock T4 Temper
BS L105 Tube T4 Temper S07-1011, S07-1012
BS L156 Sheet and Strip T4 Temper
BS L157 Sheet and Strip T6 Temper
BS L158 Sheet and Strip T4 Temper Close Tolerance.
BS L159 Sheet and Strip T6 Temper Close Tolerance.
BS L163 Clad Sheet and Strip T3 Temper
BS L163 Clad Sheet and Strip T4 Temper
BS L164 Clad Sheet and Strip
BS L165 Clad Sheet and Strip T6 Temper
BS L166 Clad Sheet and Strip T4 Temper Close Tolerance.
BS L167 Clad Sheet and Strip T6 Temper close Tolerance.
BS L168 Bars and Sections T6, T6510 and T6511
BS H15, HS15, HP15, HT15, HE15.
AlCu4SiMg
A-U4SG
QQ-A-200/2
QQ-A-225/4
QQ-A-250/3
DTD 5010, Alloy 2014A
DTD 5030, DTD 5040
EN 2087
EN 2088
EN 2089 SHEET
EN 2395 SHEET
EN 2100 BAR T4511, EN 2634 BAR T4511
EN 2324 BAR, EN 2639 BAR, EN 2384, EN2635 T6, T6511
EN 2634 (with peripheral coarse grain control)
EN 2639 (with peripheral coarse grain control)
EN 2635 (with peripheral coarse grain control)
AECMA 2387
Similar Specification
BS H15
Alcan GB-26S
AWCO-305
Birmetal-478
BA 305 and BA 355
Durcilium-K
Hiduminium-66
Avional-660 and Avional-662
BAEM 0039, BAEM 0128 and BAEM 0173
MIL-A-12545
Chemical Composition
| Weight% | Al | Si | Fe | Cu | Mn | Cr | Mg | Ni | Zn | Ti+Zr | Ti | Other Each | Other Total |
| Alloy 2014a AECMA | Rem | 0.50 - 0.90 | 0.50 max | 3.9 - 5.0 | 0.4-1.2 | 0.10 max | 0.2-0.8 | 0.1 max | 0.25 max | 0.20 max | 0.15 max | 0.05 max | 0.15 max |
| Alloy 2014 USA | Rem | 0.50-1.20 | 0.7 max | 3.9 - 5.0 | 0.4 - 1.2 | 0.10 max | 0.2-0.8 | - | 0.25 max | - | 0.15 max | 0.05 max | 0.15 max |
Property
| Material | Temper | Thickness (mm) | Tensile Strength min (N/mm) | Yield Strength min (N/mm) | Elongation in 50 mm | ||||
| 0.5 mm | 0.8 mm | 1.3 mm | 2.6 mm | 3.0 mm | |||||
| Alloy 2014 Sheet | T4 Bare | 0.2-6.0 | 400 | 225 | 13 | 14 | 14 | 14 | 14 |
| Alloy 2014 Sheet | T6 Bare | 0.2-6.0 | 440 | 380 | 6 | 6 | 7 | 7 | 8 |
| Alloy 2014 Sheet | T4 Clad | 0.2-1.6 | 385 | 240 | 13 | 14 | 14 | - | - |
| Alloy 2014 Sheet | T4 Clad | 1.6-6.0 | 395 | 245 | - | - | - | 14 | 14 |
| Alloy 2014 Sheet | T6 Clad | 0.2-1.6 | 420 | 345 | 7 | 7 | 8 | - | - |
| Alloy 2014 Sheet | T6 Clad | 1.6-6.0 | 420 | 355 | - | - | - | 9 | 9 |
| Material | Temper | Diameter (mm) | Tensile Strength min ((N/mm) | Yield Strength (min) (N/mm) | Elongation on 5.65 V (min) | ||||
| Alloy 2014 Bar | T4 | <20 | 370 | 230 | 11 | ||||
| Alloy 2014 Bar | T4 | 20-75 | 390 | 250 | 11 | ||||
| Alloy 2014 Bar | T4 | 75-150 | 390 | 250 | 9 | ||||
| Alloy 2014 Bar | T4 | 150-200 | 370 | 230 | 8 | ||||
| Alloy 2014 Bar | T6510 | 20-75 | 480 | 435 | 7 | ||||
| Alloy 2014 Bar | T6510 | 75-150 | 465 | 420 | 7 | ||||
| Alloy 2014 Bar | T6510 | 150-200 | 435 | 390 | 7 | ||||
Application
Aerospace: 2014 aluminum alloy is frequently used in the aerospace industry for structural components such as aircraft fuselage structures, wings, and other critical parts. Its high strength-to-weight ratio and good fatigue resistance make it ideal for these applications.
Automotive: In the automotive sector, 2014 aluminum alloy may be used in various components where strength and durability are required, such as wheels, suspension components, and frames.
Sporting Goods: This alloy is also popular in the sporting goods industry for products such as bicycle frames, where lightweight materials with good strength properties are essential.
Marine Applications: Due to its corrosion resistance and strength, 2014 aluminum alloy finds use in marine applications for boat hulls, masts, and other marine equipment.
Machined Parts: Its good machinability makes 2014 aluminum alloy suitable for applications where intricate parts need to be manufactured, such as in the production of fittings, valves, and other precision components.
Structural Components: Beyond aerospace, 2014 aluminum alloy is used in various structural applications where its strength and toughness are advantageous, such as in bridges and building construction.
Your enquiry
Can't find the information you need? Please contact us directly.